CourseWalk The Eventer's App

Allow CourseWalk to access your GPS

Press "Allow" to allow CourseWalk to use your current location.

Add a new course walk

Press on "New" at the bottom of the screen.

Create a new course walk

Fill out the desired fields.

Press once your are finished.

Loading the map

Wait until CourseWalk has acquired your current location.

Start recording by pressing the button.

Walk your course

Start walking your course. The recorded track will be shown in red.

Add a new fence

Stop a few steps before the first fence. Press button to add the fence.

The recording is paused while in the "New Fence" window.

Fill out the desired information.

Press to take a picture of the fence.

Walk around the fence and press to mark the fence position and continue recording the track.

Repeat for all fences

Repeat the previous step for all fences.

Press button to add pictures of waypoints and compulsory flags.

Press button to pause the recording.

Walking off course

If you happen to walk the wrong track, CourseWalk allows you to erase the bad track.

Press button to pause the recording.

Press button to enter the erase mode.

Select section to erase

Press button to select section to erase.

Press button to reduce the section to erase.

Delete section to erase

Press button to delete the section to erase.

Press button to exit the erase mode.

Continue recording

Continue recording by pressing the button.

Save your course walk

Press once you cross the finish line to save your course walk.

Next guide: View a course.